IM-9EP C/W ELSD AND AC BOOSTER PUMP
Features
-
Flow Switch System
the heater only operates when there is sufficient water flow. -
AC Booster pump
increases the water flow rate to give you a strong jet of water everytime. -
Pump Activator (IM-9EP and IM-9i only)
will boost up up water flow in places with insufficient flow to activate the heater. -
ELSD
Cuts off current flow if there is a risk of any current leakage. -
Thermal Cut-out
Auto Reset prevents overheating at 55°C -
Nylon Glass Fibre Internal Construction
A strong & durable non-conductive material for further insulation against electric shock. -
Splash-proof IP25 Standard
protection against water seeping into the heater's internal mechanism.
-
Electronic Temperature Control
Shower temperature can be selected according to personal preference.
Technical Specification
Electrical Rating | |
Power |
3.5kW - 5.5kW |
Voltage | 220-240Vac |
Frequency | 50/60Hz |
Minimum Water Flow Rate |
3 liters/minute |
Minimum Pressure |
20kPa (0.2 bar / 2.9 psi) |
Maximum Pressure |
0.3 MPa (3 bar / 43.5psi) |
Heater Dimension |
213 (W) X 406 (L) X 86mm (H) |
Nett Weight | 3.0kg |
Pump | |
Motor Type | AC |
Noise Level | < 70db |
Rating | 120W 240V - 50Hz |